RSVG for load compensation of electric arc furnace--Substation of Fujian Hua'an hydropower plant

RSVG for load compensation of electric arc furnace--Substation of Fujian Hua'an hydropower plant. The 10kV busbar of Fujian Hua'an hydropower plant power development company 35kV Jinshan No.2 substation is connected with four feeders of Yuxing I, II, III and IV for the load of HUAYIXIN iron plant. Yuxing I and II feed two 8000kVA electric arc furnaces respectively, YuxingIII supply one 4000kVA refining furnace, Yuxing IV supply one 630kVA power transformer and 5000kVA reactive power compensation device. In normal production, two EAF and refining furnace will be produced at the same time.



Because the electric arc furnace will produce a lot of reactive power impact when it works, it will cause a large reactive power fluctuation on the public busbar of the power grid, and it will produce irregular low order harmonics, which will have a greater impact on the hydropower plant equipment close to this load. When the electric arc furnace is working, the active power fluctuation of the hydroelectric generating unit can reach 6MW ~ 7MW. The rapid fluctuation of the active power may cause the vibration of the unit, which has great harm to the long-term stable operation of the unit.

RXPE solution

In order to solve the existing power quality problems on site, RXPE installed a set of 10kV cascade dynamic reactive power compensation and harmonic filtering device (SVG + FC type) with compensation capacity of not less than 14Mvar at the outgoing line of 10kV switch cabinet, totally one set. The device includes a set of SVG not less than ± 7 Mvar and a set of FC with fundamental compensation capacity not less than 7 Mvar. The device can realize continuous and rapid reactive power regulation in the range of not less than 0 Mvar inductive to 14 Mvar capacitive, and filtering each harmonic current generated by electric arc furnace.


Main wiring diagram of dynamic reactive power compensation and harmonic filtering device

Site photos of dynamic reactive power compensation and harmonic filtering device①

Site photos of dynamic reactive power compensation and harmonic filtering device②



User benefits

After the operation of SVG, the grid voltage is stable, the power factor is higher than 0.95, and the power quality problems such as harmonics, negative sequence and voltage flicker are obviously improved.
在并网点电能质量明显提升的同时,用户水力发电机组运行状况也得以改善,电弧炉工作时,水力发电机组的有功功率波动小于1MW。While the power quality of the grid is improved obviously, the operation condition of the user's hydropower units is also improved. When the electric arc furnace is working, the fluctuation of the active power of the hydropower units is less than 1MW.




Comparison of harmonic current before and after compensation

Comparison of instantaneous flicker before and after compensation